Embeds and plates before the pour
TG Welding builds steel for concrete, foundation and piering contractors in Central Texas. We cut and weld embed plates, anchor bolt templates, pier caps and brackets in our Liberty Hill shop. Plate parts come off our CNC plasma table. Send the drawings and quantities, and you get a written quote in days with the schedule confirmed in writing once you approve the quote.
001 The problem
The pour does not wait on steel
- 01
Embeds hold up the pour
Forms are set and the truck is booked. If the embeds are not on site, the whole crew stands around.
- 02
Templates that do not match
A template off by a hole means bolts in the wrong spot. Fixing that after the pour is slow and costly.
- 03
Small runs get ignored
Some shops won't touch a short run of plates. You still need them by the pour date.
002 What we build
What we build for concrete crews
Plate and bracket work cut to your drawings and counted to your quantity.
- 01Embed platesPlates with welded studs or bars, cut and welded to your drawings.→
- 02Anchor bolt templatesPlate templates cut on our CNC plasma table to match your bolt pattern.→
- 03Pier capsCaps and bearing plates built to the sizes on your drawings.→
- 04Column base platesSteel columns with welded base and cap plates, ready to set.→
- 05Brackets and clipsCustom brackets for forms, piers and tie-ins, one part or a thousand.→
- 06Field welds to embedsOur mobile rig comes out to weld to embeds after the pour.→
003 How it works
Drawings in. Steel out.
Four steps, all in writing, so your team always knows what is being built and when it lands.
- Send drawings and countsSend the plate drawings, the bolt pattern and how many you need.
- Get a quoteWe send a written quote in days, not weeks or months.
- Approve the quoteYour schedule is confirmed in writing once you approve the quote.
- Ready for the pourWe cut, weld and stage the parts, then deliver them to your site.
004 From our jobs
Shot on our floor and our sites
Real TG Welding work. No stock photos.
CNC plasma table cutting plate parts 
Fresh welds on steel tube base plates 
Steel columns with welded base and cap plates 
Lug plate welded onto a pipe frame 
Stack of welded steel frames ready to finish 
Two welders fitting pipe frames on stands 
Red-iron frames set on a fresh slab 
Crew pouring a reinforced slab for a steel building
005 Why TG Welding
Why concrete crews pick TG
Quality work, finished on time and on budget. Exactly what they said they would do.
Verified TG Welding review
- CNC plasma in house
- Plate parts are cut on our own table, so a revised drawing does not wait on an outside shop.
- Any run size
- Production runs welcome, one part or a thousand. We stage parts on racks so counts stay straight.
- Vendor setup is easy
- $2M general liability, a COI on request, and payment by ACH or check.
006 Vendor setup
Set us up as a vendor in one sheet
The contractor packet has what your AP team needs. Questions go to accounting@tgweldingatx.com.
- Legal name
- TG Welding LLC
- Insurance
- $2M general liability
- Payment
- ACH or check
- Quotes
- In writing, in days
007 FAQ
Straight answers for concrete and foundation
Can you cut anchor bolt templates to our bolt pattern?
Yes. We cut plate templates on our CNC plasma table to the pattern on your drawings. Send the drawing with hole sizes, spacing and quantity. We quote it in writing in days, and the schedule is confirmed in writing once you approve the quote.
Will you take a small run of embed plates?
Yes. Production runs are welcome, one part or a thousand. A short run of embeds for one pour gets the same written quote and the same written schedule as a big order. Send the drawing, the count and your pour date to sam@tgweldingatx.com.
Do you design the embeds or just build them?
We build them. We fabricate to the engineered drawings you supply, and we're not engineers. If a detail on the drawing is unclear, we ask before we cut, so the parts match what your engineer called for. Send the drawings with your quantities and we'll quote it in writing.
Can you weld to embeds after the pour?
Yes. Our fully equipped mobile welding rig comes to the job site to weld plates, brackets or columns to embeds. Tell us what is going on the embeds and when you need it, and we will quote the field work in writing.
Got a pour coming up?
Send drawings and quantities to sam@tgweldingatx.com or call the shop at (512) 548-5401 for a written quote.