Misc metals for the data center build
TG Welding builds misc metals for trade contractors and GCs on data center work along the Georgetown, Taylor and Temple corridor. We fab equipment and pipe supports, platforms, stairs and rail, bollards, security fence and gates, and lifting lugs in our Liberty Hill shop. Production runs welcome, quoted in days, with field welding on site.
001 The problem
Big jobs still need small steel on time
- 01
Misc metals get squeezed
The big steel packages get the attention. Supports, stairs and bollards end up late and hold up the trades around them.
- 02
Revs change the counts
Revs come out and counts change. A shop that can't adjust quickly leaves you short in the field.
- 03
Big shops are booked
Large fabricators are full with the main frames. Getting a smaller package quoted can take weeks.
002 What we build
Steel packages we build for the site
Built to your drawings, in runs to your quantity, in Liberty Hill.
- 01Equipment and pipe supportsStands, frames and supports for pipe and equipment, built to the drawings.→
- 02Platforms and stairsSteel stairs and platforms built from shop drawings, with guardrail and handrail.→
- 03Steel bollardsSteel bollards built in runs to the quantity you need.→
- 04Security fence and gatesSteel fence, gates and enclosures built and set by our crew.→
- 05Lifting lugsLifting lugs, clevis lugs and lug plates cut on our CNC plasma table.→
- 06Field weldingOur mobile rig handles field welds and fit-up on site.→
003 How it works
Drawings in. Steel out.
Four steps, all in writing, so your team always knows what is being built and when it lands.
- Send drawings and revsSend the current drawing revision with quantities for each item.
- Get a written quoteYou get a written quote in days, not weeks or months.
- Approve the quoteWe confirm the schedule in writing once you approve the quote.
- Build, deliver, setWe build the run in Liberty Hill, then deliver it or set it with our crew.
004 From our jobs
Shot on our floor and our sites
Real TG Welding work. No stock photos.
Two welders fitting pipe frames on stands 
Pipe frames with lug plates lined up in the shop 
CNC plasma table cutting plate parts 
Commercial steel stair and guardrail, switchback layout 
End view, pipe rails welded on a channel frame 
Welding pipe under the shop's overhead hoist 
Pipe and I-beam crossing, ready to set 
Lug plate welded onto a pipe frame
005 Why TG Welding
What a misc metals sub should bring
They take on the tricky jobs other shops pass on and get them right.
Verified TG Welding review
- Production runs welcome
- Production runs welcome, one part or a thousand. A CNC plasma table and staging racks keep parts consistent.
- Close to the corridor
- Our shop is on Highway 183 in Liberty Hill, in Williamson County. For jobs farther out, call the shop at (512) 548-5401.
- Ready for vendor setup
- $2M general liability, COI on request, ACH or check, and a one-sheet contractor packet.
006 Vendor setup
Set us up as a vendor in one sheet
The contractor packet has what your AP team needs. Questions go to accounting@tgweldingatx.com.
- Legal name
- TG Welding LLC
- Insurance
- $2M general liability
- Payment
- ACH or check
- Quotes
- In writing, in days
007 FAQ
Straight answers for data centers
What misc metals can you take on?
Pipe and equipment supports, stands and frames, steel stairs and platforms, guardrail and handrail, bollards, security fence and gates, and lifting lugs. We build to your drawings in Liberty Hill and run quantities to your count. Send the package and you'll have a written quote in days, not weeks or months.
Can you handle revisions and changing quantities?
Yes. Send the new revision and the updated counts, and we'll update the written quote. Production runs are welcome, one part or a thousand, so a change in quantity is a change to the quote. Keep the current rev in front of us and we build to it.
Do you weld on site?
Yes. Our fully equipped mobile welding rig comes to the job site for field welds and fit-up. Most parts are built in our Liberty Hill bay and set by our crew. That keeps shop work and field work under one sub, with one schedule confirmed in writing once you approve the quote.
What does vendor setup look like?
We keep a one-sheet contractor packet for vendor setup on this page. We carry $2M general liability and send a COI on request. Payment is by ACH or check, and AP questions go to accounting@tgweldingatx.com. Your office gets what it needs to set us up as a vendor without chasing us.
Misc metals package ready?
Send the drawings and quantities to tim@tgweldingatx.com for a written quote in days.