Steel entrances for new subdivisions
TG Welding builds steel for land developers across Central Texas. We fabricate entrance gates, arches, perimeter fence and amenity pavilions in our Liberty Hill shop, then our crew sets them on site. Send your site plan or drawings. You'll get a written quote in days, and the schedule is confirmed in writing once you approve the quote.
001 The problem
The entrance is the first thing buyers see
- 01
Entry goes in last
The front gate often waits until the end of the job. If the fab shop slips, your first impression slips with it.
- 02
Too many trades
One crew for posts, another for gates, a third for the pavilion. Every handoff is a chance for the schedule to break.
- 03
Phases need to match
Phase two should look like phase one. A new shop and new details make the fence line look patched.
002 What we build
What we build for developers
Shop-built steel for the entry, the perimeter and the amenity center.
- 01Entrance gatesSingle and double swing gates built to your drawings, ready for an operator.→
- 02Entrance archesSteel arches with cedar fence wings or steel panels on each side.→
- 03Perimeter fence runsPipe post and wire, ornamental steel, or cedar on steel posts along the road.→
- 04Amenity pavilionsSteel pavilions and gable trusses for pools, parks and gathering areas.→
- 05Plasma-cut signs and starsMonograms, Texas stars and backlit letters cut on our CNC plasma table.→
- 06Field fixes and add-onsOur mobile rig comes out for repairs, gate tweaks and late adds.→
003 How it works
Drawings in. Steel out.
Four steps, all in writing, so your team always knows what is being built and when it lands.
- Send the plansShare the site plan, entry drawings or a sketch of what you want.
- Get a quoteWe send a written quote in days, not weeks or months.
- Approve the quoteYour schedule is confirmed in writing once you approve the quote.
- We fab and setWe build it in our Liberty Hill bay and our crew installs it on site.
004 From our jobs
Shot on our floor and our sites
Real TG Welding work. No stock photos.
Steel entrance arch with cedar panel fence wings 
Monogram double swing gate under steel entrance arch 
Ranch entrance gate with cut steel Texas star 
Ornamental steel fence line along the road 
Gable pavilion with exposed steel trusses 
Gable pavilion set over a sunken patio 
Automated double swing gate with steel frame 
Backlit plasma cut business signs on stone wall
005 Why TG Welding
Why developers call TG
Real craftsmanship. The fence and gate came out better than I pictured, and it is built to last.
Verified TG Welding review
- Shop and field crew
- We build it and we set it. You deal with one company from gate leaf to last post.
- Same details every phase
- Repeat runs keep later phases matching the first.
- Easy vendor setup
- $2M general liability with a COI on request. Our one-sheet contractor packet gets us in your system fast.
006 Vendor setup
Set us up as a vendor in one sheet
The contractor packet has what your AP team needs. Questions go to accounting@tgweldingatx.com.
- Legal name
- TG Welding LLC
- Insurance
- $2M general liability
- Payment
- ACH or check
- Quotes
- In writing, in days
007 FAQ
Straight answers for developers
Can you build the entrance and the perimeter fence on the same job?
Yes. We build entrance gates, arches and fence runs in our Liberty Hill shop, then our crew installs them on site. Running both with one company keeps the details consistent and cuts out a handoff between trades. Send the site plan and we will quote the whole package in writing.
Will the gates work with our access control system?
Yes. We build gate leaves and frames ready for the operator your access control installer is putting in. Send us the operator model or the installer's notes with your drawings. We build the gate to match, and we can work alongside the installer on site.
Can you match an entrance from an earlier phase?
Yes, if we have photos, drawings or the existing piece to measure. Send what you have and we will quote the match in writing. For a new subdivision, building every phase from the same quote keeps the steel, the cut details and the finish the same across the whole project.
What do you need to set us up as a vendor?
Our one-sheet contractor packet covers it, and it's on this page. We carry $2M in general liability and send a COI on request. We take payment by ACH or check. Email accounting@tgweldingatx.com for anything else your AP team needs to get us set up.
Planning a new entrance?
Send the site plan to sam@tgweldingatx.com or call the shop at (512) 548-5401 for a written quote.