The weld shop behind your fence crew
TG Welding is a fab partner for fence contractors across Central Texas. We build gate leaves, steel posts, wire and ornamental panels, and entrance arches in our Liberty Hill shop. Our mobile rig handles overflow welding on your line runs. Send the drawing or the measurements and you'll get a written quote in days, with the schedule confirmed in writing once you approve the quote.
001 The problem
When the job needs more welding than your crew has
- 01
Custom gates eat time
A double swing gate with a cut star can tie up your best welder for days. Meanwhile the line runs don't get built.
- 02
Overflow with nowhere to go
You sold more fence than your crew can weld this month. Turning work away hurts.
- 03
Gates that sag or bind
A gate leaf built out of square shows up on the punch list. Then you are back out fixing it.
002 What we build
What we build for fence contractors
Gates, panels and field welds, built to your measurements and your schedule.
- 01Gate leavesSingle, double swing and drive gates built square and ready to hang.→
- 02Entrance archesSteel arches and entrance frames with cedar or steel fence wings.→
- 03Panels in runsPipe frame wire panels and ornamental panels in runs of any size.→
- 04Steel posts for cedarSteel posts and frames for horizontal and privacy cedar fence.→
- 05Stars and monogramsTexas stars, monograms and brands cut on our CNC plasma table.→
- 06On-site overflow weldingOur mobile rig welds panels to posts and top rail on your line runs.→
003 How it works
Drawings in. Steel out.
Four steps, all in writing, so your team always knows what is being built and when it lands.
- Send the jobSend the gate drawing, the opening sizes or the line run footage.
- Get a quoteWe send a written quote in days, not weeks or months.
- Approval locks the dateOnce you approve the quote, we confirm the schedule in writing.
- Pick up or we weldGates and panels ship from our shop, or our rig welds on your site.
004 From our jobs
Shot on our floor and our sites
Real TG Welding work. No stock photos.
Welding a wire panel to a pipe fence post on site 
Setting pipe fence posts and bracing on site 
Ranch entrance gate with cut steel Texas star 
Monogram double swing gate under steel entrance arch 
Steel entrance arch with cedar panel fence wings 
Horizontal cedar fence on black steel posts 
Black steel frame wire panel fence on a hillside 
Pipe and wire fence mid-build with pipe stock
005 Why TG Welding
Why fence contractors call TG
They take on the tricky jobs other shops pass on and get them right.
Verified TG Welding review
- We build fence too
- Ranch fence, entrance gates with cut stars, arches and monogram gates are work we do.
- Shop plus mobile rig
- Gates get built square in the bay. Panels get welded to posts on site.
- You keep the customer
- We build for your job and work to your schedule.
006 Vendor setup
Set us up as a vendor in one sheet
The contractor packet has what your AP team needs. Questions go to accounting@tgweldingatx.com.
- Legal name
- TG Welding LLC
- Insurance
- $2M general liability
- Payment
- ACH or check
- Quotes
- In writing, in days
007 FAQ
Straight answers for fence companies
Can you build gates for a job we sold?
Yes. Send the opening sizes, the style and any photos or drawings. We build the gate leaves square in our Liberty Hill shop, ready for you to hang, or our crew can set them. You get a written quote in days, and the schedule is confirmed in writing once you approve the quote.
Can your crew weld on our line runs?
Yes. Our fully equipped mobile welding rig comes to the job site to weld wire panels to posts, set top rail and handle overflow welding. Send the footage, the post spacing and the site location, and we will quote the field work in writing.
Can you build panels in volume?
Yes. Production runs welcome, one part or a thousand. Pipe frame wire panels and ornamental panels built in the shop go up faster and stay consistent across the run. Send the panel drawing and the count to sam@tgweldingatx.com.
Can you cut custom stars, brands or monograms?
Yes. We cut them on our CNC plasma table and weld them into the gate or arch. Send the artwork or a clear image with the size you want. We will quote it in writing with the gate or as a separate piece.
Got more fence than welders?
Send the job to sam@tgweldingatx.com or call the shop at (512) 548-5401 for a written quote.