Gate steel built for your operators
TG Welding builds steel gate leaves, frames and posts for gate automation and access control installers across Central Texas. Send your opening size, operator type and drawings. We send a written quote in days, fab the steel in our Liberty Hill shop, and can set posts and hang leaves on site so your crew can mount the operator.
001 The problem
Your operator is only as good as the gate
- 01
Gates that sag and bind
A leaf that racks out of square fights the operator every cycle. Your crew ends up back on site chasing a problem that started in the weld.
- 02
Waiting on the steel
The operator is on the shelf and the gate isn't built. The job sits open and the customer keeps calling you.
- 03
Mount points nobody planned
Brackets and plates get added in the field with a grinder and a guess. That's rework you can't bill.
002 What we build
What we build for gate installers
Steel for the gate, the posts and the operator, built to your drawings.
- 01Swing gate leavesSingle and double swing leaves in pipe, tube and flat bar, built square to your opening.→
- 02Slide gate framesSlide gate frames built to your track, roller and operator layout.→
- 03Posts and mount platesGate posts, base plates and operator mount plates cut on our CNC plasma table.→
- 04Entrance archesSteel arches over the drive, with cut work like a Texas star or a monogram.→
- 05Repeat gate partsThe same hinge plate, bracket or leaf in quantity, built in runs to your quantity.→
- 06Field fixesOur mobile rig comes out to reweld a hinge, reset a post or brace a sagging leaf.→
003 How it works
Drawings in. Steel out.
Four steps, all in writing, so your team always knows what is being built and when it lands.
- Send the openingSend the opening width, operator type and any drawings or photos.
- Get a written quoteWe send a written quote in days, not weeks or months.
- Approve the quoteOnce you approve the quote, we confirm the schedule in writing.
- Build and hangWe fab in Liberty Hill and can set posts and hang leaves, ready for your operator.
004 From our jobs
Shot on our floor and our sites
Real TG Welding work. No stock photos.
Automated double swing gate with steel frame 
Automated swing gate with arm operator installed 
Wood and steel swing gate with automatic opener 
Solar powered opener on a ranch drive gate 
Monogram double swing gate under steel entrance arch 
Ranch entrance gate with cut steel Texas star 
Steel entrance arch with cedar panel fence wings 
CNC plasma table cutting plate parts
005 Why TG Welding
Why installers send us their gates
Real craftsmanship. The fence and gate came out better than I pictured, and it is built to last.
Verified TG Welding review
- Built square, ready to mount
- We build leaves and frames to your operator layout. Your crew shows up to mount and wire, not to grind and weld.
- Quotes in days
- A written quote in days, not weeks or months, so you can price the job while the customer is ready.
- Shop and field
- We fab in the Liberty Hill bay. Our mobile rig handles site welds on posts, hinges and fence tie-ins.
006 Vendor setup
Set us up as a vendor in one sheet
The contractor packet has what your AP team needs. Questions go to accounting@tgweldingatx.com.
- Legal name
- TG Welding LLC
- Insurance
- $2M general liability
- Payment
- ACH or check
- Quotes
- In writing, in days
007 FAQ
Straight answers for gate and access control
Do you install the gate operator?
No. We build and set the steel and leave the operator to you. That means gate leaves, slide frames, posts and mount plates built to your layout. Our crew can set posts and hang leaves on site, so your team arrives to mount, wire and program the operator.
Can you build a slide gate to my track and roller layout?
Yes. Send the opening width, the track and roller layout and the operator you plan to use. We build the frame to that layout in our Liberty Hill shop. If you have a drawing, send it. If not, a sketch with dimensions and site photos is a good start for a written quote.
How fast can I get a quote?
Written quotes go out in days, not weeks or months. Send drawings, dimensions or photos to sam@tgweldingatx.com, or call the shop at (512) 548-5401. Once you approve the quote, we confirm the schedule in writing so you can book your crew and give your customer a real date.
Can you fix a gate that's already up and dragging?
Often, yes. Our fully equipped mobile welding rig comes to the site. We can reweld hinges, brace a leaf that has racked, or reset and reweld a post. Send photos and the address so we can see what it needs and quote it in writing.
Got a gate to build?
Send the opening size and operator type, and we'll send a written quote in days.