Production welding for your line
TG Welding runs production welding for manufacturers and OEMs in Central Texas. Send drawings, revs and quantities. We quote in writing in days, confirm the schedule in writing once you approve the quote, and build the run in our Liberty Hill shop. One part or a thousand. Lugs, frames, enclosures and plate parts cut on our CNC plasma table.
001 The problem
When your welding vendor can't keep up
- 01
Late parts stop your line
One short weldment holds up the assembly behind it. Your floor waits and your ship date slips.
- 02
Rev changes get missed
The drawing changed and the parts didn't. Now you're sorting scrap and paying for the run twice.
- 03
Repeat orders start over
Every reorder feels like a new job. You resend files, explain the part again and wait on another quote.
002 What we build
Parts we build in runs
Weldments, plate parts and assemblies built to your drawings and quantities.
- 01Lifting and clevis lugsLugs cut, fit and welded in house, shipped by the pallet.→
- 02Pipe and tube framesPipe rails with lug plates and welded frames built on shop stands.→
- 03Steel enclosuresRepeat runs of welded steel boxes and enclosures, loaded on the flatbed.→
- 04Plate partsPlate parts and brackets cut on our CNC plasma table.→
- 05Structural weldmentsBeams, columns and base plates built from your shop drawings.→
- 06One-off partsA single part or fixture to prove the design before the run starts.→
003 How it works
Drawings in. Steel out.
Four steps, all in writing, so your team always knows what is being built and when it lands.
- Send drawings and revsSend the drawing package, the current rev and the quantities you need.
- Get a written quoteWe quote in writing in days, not weeks or months.
- Approve the quoteWe confirm the schedule in writing once you approve the quote.
- Run and shipWe build the run in Liberty Hill and stage it on racks for pickup or a flatbed load.
004 From our jobs
Shot on our floor and our sites
Real TG Welding work. No stock photos.
Pipe frames with lug plates lined up in the shop 
Lug plate welded onto a pipe frame 
Two welders fitting pipe frames on stands 
Crew welding a row of steel frames in the shop 
Four steel job boxes with lift sleeves 
CNC plasma table cutting plate parts 
Stack of welded steel frames ready to finish 
End view, pipe rails welded on a channel frame
005 Why TG Welding
Why manufacturers send us repeat work
Quality work, finished on time and on budget. Exactly what they said they would do.
Verified TG Welding review
- One part or a thousand
- Production runs are welcome at the quantity you need. A small order gets the same care as a big one.
- Schedule in writing
- Your schedule is confirmed in writing once you approve the quote, so planning has a date to work from.
- Easy vendor setup
- $2M general liability, COI on request, ACH or check, and a one-sheet contractor packet for your vendor file.
006 Vendor setup
Set us up as a vendor in one sheet
The contractor packet has what your AP team needs. Questions go to accounting@tgweldingatx.com.
- Legal name
- TG Welding LLC
- Insurance
- $2M general liability
- Payment
- ACH or check
- Quotes
- In writing, in days
007 FAQ
Straight answers for manufacturers and oems
Do you take small production runs?
Yes. Production runs are welcome, from one part to a thousand. Send the drawing, rev and quantity and we'll quote it in writing in days. A small run gets the same written schedule as a big one, confirmed once you approve the quote.
How do you handle drawing revisions?
We build to the drawing and rev you send. If the rev changes, send the new drawing. We'll tell you in writing how it affects the quote and the schedule before we cut anything. Keeping the rev on the drawing keeps everyone building the same part.
What do you need to set us up as a vendor?
Our one-sheet contractor packet covers it, on this page. We carry $2M general liability and send a COI on request. We take payment by ACH or check. Send your vendor forms to sam@tgweldingatx.com, and AP questions go to accounting@tgweldingatx.com. That way your office gets what it needs to set us up as a vendor without chasing us.
Can you hold a schedule on repeat orders?
Yes. Each order gets its schedule confirmed in writing once you approve the quote. For repeat parts, send the same drawing and rev and we build to it. Finished parts are staged on racks in our shop, ready for pickup or a flatbed load.
Got a run to quote?
Send drawings, revs and quantities, and we'll send a written quote in days.