Steel built for the ranch
TG Welding builds steel for ranches, landowners and ag operations across Central Texas. We set pipe post and wire fence, build entrance gates and arches, and put up steel shops and barns. Our mobile welding rig comes to your place for repairs. Everything is fabbed in our Liberty Hill shop or welded on site, with a written quote in days.
001 The problem
What slows down work on your land
- 01
Fence that sags and leans
Shallow posts and loose wire won't hold stock. You end up fixing the same line every season.
- 02
Nobody wants the drive out
Plenty of welders won't come past the city limits. Broken equipment sits while you wait.
- 03
Gates that look like everyone's
A stock gate from the farm store doesn't fit the place. Your entrance is the first thing people see.
002 What we build
What we build for the ranch
Shop-built steel and field welding where the work is.
- 01Ranch fencePipe post and wire, pipe top rail and four rail pipe fence.→
- 02Entrance gates and archesDrive gates and arches with cut Texas stars or monograms.→
- 03Steel shops and barnsRed-iron frames with covered porches and roll-up doors.→
- 04PavilionsGable pavilions with steel trusses for shade and gatherings.→
- 05Field repairsOur mobile rig comes to the ranch for equipment, trailer and fence welds.→
- 06Truck beds and hitchesCustom steel truck beds, headache racks and hitches welded on.→
003 How it works
Drawings in. Steel out.
Four steps, all in writing, so your team always knows what is being built and when it lands.
- Tell us the jobSend the fence length, gate sizes or photos and where the land is.
- Written quoteYou get a written quote in days, not weeks or months.
- Lock the scheduleApprove the quote and we confirm the schedule in writing.
- We build and setWe fab in the shop and our crew sets it on your land.
004 From our jobs
Shot on our floor and our sites
Real TG Welding work. No stock photos.
Pipe post and wire ranch fence at sunset 
Ranch entrance gate with cut steel Texas star 
Steel entrance arch with cedar panel fence wings 
Four rail pipe fence along the pasture 
Setting pipe fence posts and bracing on site 
Hanging water gap across a creek crossing 
Solar powered opener on a ranch drive gate 
Black steel shop with full-length covered porch
005 Why TG Welding
Why landowners call TG
Real craftsmanship. The fence and gate came out better than I pictured, and it is built to last.
Verified TG Welding review
- We come to you
- Our fully equipped mobile welding rig works at the ranch, the barn or the pasture.
- Gates with your mark
- Our CNC plasma table cuts Texas stars, monograms and lettering right into the steel.
- Shop and field crew
- We set posts and bracing and weld wire panels on site. The crew that fabs it also sets it.
006 Vendor setup
Set us up as a vendor in one sheet
The contractor packet has what your AP team needs. Questions go to accounting@tgweldingatx.com.
- Legal name
- TG Welding LLC
- Insurance
- $2M general liability
- Payment
- ACH or check
- Quotes
- In writing, in days
007 FAQ
Straight answers for ranches and ag
Do you build pipe and wire ranch fence?
Yes. We set steel pipe posts and bracing, then weld wire panels or run pipe top rail along the line. We also build four rail pipe fence and walk gates. Send the fence length, the ground and the gate locations, and you get a written quote in days.
Can you cut our brand or a Texas star into the entrance gate?
Yes. Our CNC plasma table cuts stars, brands, monograms and letters from steel plate. We've built ranch entrance gates with a cut Texas star and monogram double swing gates under steel arches. Send a sketch or the logo file and the opening width.
Will your mobile welder come out to the ranch?
Yes. Our fully equipped mobile welding rig comes to the job site, the ranch or the shop. It handles equipment repairs, trailer hitches, fence welds and gate fixes. For land farther than our usual area, call the shop at (512) 548-5401 to check.
Do you put up steel barns and shops?
Yes. We build steel shops with red-iron frames on slabs, covered porches and roll-up doors. We fab in our Liberty Hill bay and our crew sets the frame on site. Send the size, door count and porch needs for a written quote.
Work waiting on your land?
Send the details to sam@tgweldingatx.com for a written quote, or call the shop at (512) 548-5401.