Open the wall with steel
TG Welding builds steel beams, columns and headers for remodeling contractors in Liberty Hill, Georgetown, Round Rock and across Central Texas. We build to your engineer's drawings in our Liberty Hill shop, then our crew brings the steel in and sets it. You get a written quote in days, and the schedule is confirmed in writing once you approve the quote.
001 The problem
Remodel steel has to fit a house that's already there
- 01
Tight access, finished rooms
The beam has to come through a door, past finished rooms and up into a wall. Steel built without that in mind won't go in.
- 02
Shoring can't sit long
Every day the wall is shored, the homeowner lives in a job site. A late beam stretches that out.
- 03
Field fit surprises
Old framing is rarely square. A sub who won't adjust leaves you with gaps and rework.
002 What we build
Steel for the opening, the stair and the porch
Built to your engineer's drawings, set by our crew.
- 01Beams and headersSteel beams and headers to open up load-bearing walls.→
- 02Columns and platesSteel columns with welded base and cap plates.→
- 03Field weldingOur mobile rig handles welds that have to be made in place.→
- 04Stair rail updatesNew horizontal bar or cable rail for stairs, lofts and landings.→
- 05Porch and deck railPorch, deck and driveway rail built to fit the existing house.→
- 06Pergolas and coversSteel pergolas and patio covers for outdoor living additions.→
003 How it works
Drawings in. Steel out.
Four steps, all in writing, so your team always knows what is being built and when it lands.
- Send the drawingsEmail your engineer's drawings and photos of the opening to Tim or Sam.
- Get a written quoteYou get a written quote in days, not weeks or months.
- Lock the dateWe confirm the schedule in writing once you approve the quote, so you can plan shoring.
- Fab and setWe build it in Liberty Hill and our crew brings it in and sets it.
004 From our jobs
Shot on our floor and our sites
Real TG Welding work. No stock photos.
Steel column set between wood framing in a remodel 
Steel header and posts opening up a load-bearing wall 
Steel beam with welded plates set in wall framing 
Steel columns with welded base and cap plates 
Crew setting overhead steel beam with material lifts 
Cable rail around upstairs landing and stairwell 
Cable rail on back porch and steps 
Covered outdoor kitchen with a steel frame
005 Why TG Welding
Why remodelers bring us the steel
They take on the tricky jobs other shops pass on and get them right.
Verified TG Welding review
- Tricky jobs welcome
- Tight access, odd openings and old framing are the jobs we take on.
- Shop and field
- We build it and set it, and the mobile rig handles welds in place.
- Clear paperwork
- $2M general liability, COI on request, ACH or check, and a written schedule on every job.
006 Vendor setup
Set us up as a vendor in one sheet
The contractor packet has what your AP team needs. Questions go to accounting@tgweldingatx.com.
- Legal name
- TG Welding LLC
- Insurance
- $2M general liability
- Payment
- ACH or check
- Quotes
- In writing, in days
007 FAQ
Straight answers for remodelers
Can you set a steel beam in an occupied home?
Yes. We build the beam to your engineer's drawings and plan the install around access, so it fits through the house and into the opening. Our crew sets it, and the mobile rig handles any welds that have to happen in place. Send photos of the route in with the drawings.
Do you size the beam?
No. We build to the drawings your engineer supplies. We are fabricators, not engineers, so beam size and connections come from the design. Send the stamped drawings and photos of the opening, and we'll get you a written quote for the steel in days.
How soon can you get a beam in?
Send the drawings and you'll have a written quote in days, not weeks or months. Once you approve the quote we confirm the schedule in writing. That date is what you plan shoring and framing around, so there's no open-ended wait.
Do you take smaller steel jobs on a remodel?
Yes. One column, one header or a single stair rail is a normal job for us. We also build porch rail, deck rail and pergolas for additions. Call the shop at (512) 548-5401 or email tim@tgweldingatx.com with photos and drawings.
Opening up a wall?
Send the drawings to tim@tgweldingatx.com or call (512) 548-5401 for a written quote.