Steel details your clients will notice
TG Welding builds steel for custom home builders in Liberty Hill, Georgetown, Leander and across Central Texas. We make columns, beams, loft and stair rail, awning frames, pergolas and entrance gates to your plans. We fab it in our shop and our crew sets it on site. Send the plans and you'll get a written quote in days.
001 The problem
The steel trade can hold up a whole house
- 01
Framing waits on steel
A column or beam that shows up late stops the framers. Every trade behind them slides too.
- 02
Finish steel looks rough
Rail and gates sit at eye level for the life of the house. Sloppy welds and wavy bars get noticed at the walkthrough.
- 03
Too many small vendors
One shop for beams, another for rail, a third for the gate. That's three schedules and three invoices to chase.
002 What we build
Steel from the slab to the front gate
One shop for the structural steel and the finish steel your clients see.
- 01Columns and beamsSteel columns with base and cap plates, beams and headers built to your plans.→
- 02Loft and stair railHorizontal bar, cable and picket rail for stairs, lofts, porches and decks.→
- 03Steel stairsSteel stairs built from shop drawings and set in place by our crew.→
- 04Awning framesSteel awning frames mounted over windows and doors on a new build.→
- 05Pergolas and pavilionsSteel pergolas over pools and outdoor kitchens, with wood paired in where you want it.→
- 06Entrance gatesMonogram double swing gates, entrance arches and fence built to suit the house.→
003 How it works
Drawings in. Steel out.
Four steps, all in writing, so your team always knows what is being built and when it lands.
- Send the plansEmail plans, selections and any shop drawings to Tim or Sam.
- Get a written quoteYou get a written quote in days, not weeks or months.
- Approve the quoteWe confirm the schedule in writing once you approve the quote, so you can line up trades.
- Built and setWe fab in Liberty Hill and set it on site with our own crew.
004 From our jobs
Shot on our floor and our sites
Real TG Welding work. No stock photos.
Horizontal bar loft rail and matching stair rail 
Steel awning frames set over windows on a new build 
Steel columns with welded base and cap plates 
Powder coated newel post and horizontal bar stair rail 
Steel pergola with slat walls and stone fireplace 
Monogram double swing gate under steel entrance arch 
Steel post and cable stair rail with wood cap 
Front porch rail and stair rails on farmhouse
005 Why TG Welding
Why custom builders hand us the steel
Real craftsmanship. The fence and gate came out better than I pictured, and it is built to last.
Verified TG Welding review
- Finish you can show
- Clean welds and straight bars on rail and gates, built to sit at eye level for years.
- One steel vendor
- Structural steel, rail, pergolas and gates from one shop, on one schedule.
- Easy to set up
- $2M general liability, COI on request, ACH or check, and a one-sheet contractor packet.
006 Vendor setup
Set us up as a vendor in one sheet
The contractor packet has what your AP team needs. Questions go to accounting@tgweldingatx.com.
- Legal name
- TG Welding LLC
- Insurance
- $2M general liability
- Payment
- ACH or check
- Quotes
- In writing, in days
007 FAQ
Straight answers for custom home builders
Can you match the rail style our client picked?
Usually, yes. We build horizontal bar, cable, picket and flat bar rail, with wood caps where the design calls for them. Send the plans or a photo of the style along with the stair and landing details. We'll quote it in writing and build it to fit the stairs on site.
Do you set the steel columns and beams?
Yes. We build columns, beams and headers to your plans in our Liberty Hill shop, then our crew sets them on site. Base and cap plates are welded in the shop. If the structural design comes from your engineer, we build to those drawings.
When should we bring you in on a build?
As early as you have plans. Send them with the steel scope marked and we'll return a written quote in days. Once you approve the quote, we confirm the schedule in writing, so you can plan framing and finish trades around it.
What areas do you cover?
We work Liberty Hill, Georgetown, Leander, Cedar Park, Round Rock, Bertram, Burnet, Marble Falls and Northwest Austin, across Williamson, Burnet and Travis counties. For a build farther out, call the shop at (512) 548-5401 with the address and the scope you have in mind.
Plans on your desk?
Send them to tim@tgweldingatx.com and get a written steel quote in days.