Overflow capacity for fab shops
TG Welding takes overflow work from steel fab shops across Central Texas. Send shop drawings and quantities. We quote in writing in days, confirm the schedule in writing once you approve the quote, and build in our Liberty Hill bay. Need hands on site? Our crew can set and install the steel, and our mobile rig handles field welds.
001 The problem
When the board is full and the bids keep coming
- 01
Too much work, too few hands
Saying no to good work hurts. Saying yes and missing dates hurts more.
- 02
Erection crew is booked
The steel is ready but nobody's free to set it. The GC is calling and the site is waiting.
- 03
Subs who go quiet
You handed off a package and the sub stopped answering. Now you're chasing parts you already sold.
002 What we build
Work we take off your board
Fab, field welding and install, built to your shop drawings.
- 01Structural packagesBeams, columns, headers and base plates built from your shop drawings.→
- 02Stairs and railSteel stairs, guardrail and handrail built from shop drawings.→
- 03Production runsRepeat weldments, lugs and frames in runs to your quantity.→
- 04Plate and cut partsPlate parts cut on our CNC plasma table to feed your fit-up.→
- 05Steel building framesRed-iron frames set on the slab by our crew.→
- 06Field weldingOur mobile rig handles field welds, tie-ins and punch list work on site.→
003 How it works
Drawings in. Steel out.
Four steps, all in writing, so your team always knows what is being built and when it lands.
- Send the packageSend shop drawings, quantities and the date you need the steel.
- Get a written quoteWe send a written quote in days, not weeks or months.
- Approve the quoteOnce you approve the quote, we confirm the schedule in writing.
- Build or setWe fab in Liberty Hill, then ship it to you or set it on site with our crew.
004 From our jobs
Shot on our floor and our sites
Real TG Welding work. No stock photos.
Steel beams stood up in the shop before fitting 
W-beam frame laid out and fit up before install 
Building a steel stair from a shop drawing 
Welding pipe under the shop's overhead hoist 
Crew welding a row of steel frames in the shop 
Red-iron frame standing, purlins going on 
Crew setting overhead steel beam with material lifts 
Commercial steel stair and guardrail, switchback layout
005 Why TG Welding
Why shops send us their overflow
They take on the tricky jobs other shops pass on and get them right.
Verified TG Welding review
- We build to your drawings
- You keep the customer and the design. We build what's on the sheet and ask before we change anything.
- Tricky jobs welcome
- Odd parts and tight fits don't send us running. We'd rather work out a hard one than pass on it.
- Shop and field crew
- We fab in our bay under an overhead hoist. Then our own crew and mobile rig set and install it on site.
006 Vendor setup
Set us up as a vendor in one sheet
The contractor packet has what your AP team needs. Questions go to accounting@tgweldingatx.com.
- Legal name
- TG Welding LLC
- Insurance
- $2M general liability
- Payment
- ACH or check
- Quotes
- In writing, in days
007 FAQ
Straight answers for fabrication shops
Can you build to our shop drawings?
Yes. Send the shop drawings, quantities and the date you need the steel. We build to the sheet in our Liberty Hill bay. If something on the drawing doesn't add up, we'll ask before we cut. You get a written quote in days and a written schedule once you approve the quote.
Do you set steel, or only fab it?
Both. We fab in the Liberty Hill bay and our crew can set and install the steel on site. That covers red-iron frames, columns, beams, stairs and rail. Our fully equipped mobile rig handles field welds, so one package can run from our shop floor to the punch list.
Will you take a one-off or a short run?
Yes. Production runs are welcome, from one part to a thousand. A single odd part that's eating your shop's time is a good fit for us. Send the drawing and quantity to sam@tgweldingatx.com and we'll quote it in writing in days.
What do you need to add us as a sub?
Our one-sheet contractor packet on this page has our vendor details. We carry $2M general liability and send a COI on request. Payment is by ACH or check. For estimating questions, call Tim at (512) 713-7179 or email tim@tgweldingatx.com. Sales questions go to sam@tgweldingatx.com.
Board too full?
Send the shop drawings, and we'll send a written quote in days.