Your steel sub that shows up
TG Welding is a steel fabrication sub for commercial general contractors in Liberty Hill, Georgetown and across Central Texas. We build structural steel, steel buildings, stairs, rail and misc metals to your drawings in our Liberty Hill shop. Then our crew sets it on site. Send the drawings, get a written quote in days, and we confirm the schedule in writing once you approve the quote.
001 The problem
Steel is the scope that stalls a job
- 01
A sub who goes quiet
You send drawings and wait two weeks for a number. Then the bid goes out with a guess on the steel line.
- 02
Vendor setup drags
Your office needs a COI and vendor paperwork before work starts. Chasing a small shop for it eats days.
- 03
Rework on the punch list
Steel that doesn't match the drawings means torches on site and an unhappy super. The punch list grows and the schedule slips.
002 What we build
Steel scope we take off your plate
Built in our Liberty Hill bay, set on site by our crew.
- 01Structural steelColumns, W-beams, headers and base plates built to your drawings.→
- 02Steel buildingsRed-iron frames on your slab, with porches and roll-up door openings.→
- 03Stairs and railSteel stairs from shop drawings, with guardrail and handrail to match.→
- 04Misc metalsLugs, plates, frames, cages and the small steel items that hold up a closeout.→
- 05Field weldingOur mobile rig comes to the site for fit-up and field welds.→
- 06Fencing and gatesSteel fence, enclosures and gates around the site or the finished building.→
003 How it works
Drawings in. Steel out.
Four steps, all in writing, so your team always knows what is being built and when it lands.
- Send the drawingsEmail plans or shop drawings to Tim or Sam with the scope you need quoted.
- Get a written quoteYou get a written quote in days, not weeks or months.
- Approve the quoteOnce you approve the quote, we confirm the schedule in writing.
- Built and setWe fab in Liberty Hill and our crew sets it on your site.
004 From our jobs
Shot on our floor and our sites
Real TG Welding work. No stock photos.
Steel columns with welded base and cap plates 
Red-iron frame standing, purlins going on 
Commercial steel stair and guardrail, switchback layout 
Crew setting overhead steel beam with material lifts 
Multi-bay commercial steel building near completion 
Building a steel stair from a shop drawing 
Welding rig set up under the finished frame 
W-beam frame laid out and fit up before install
005 Why TG Welding
Why GCs keep us on the bid list
Quality work, finished on time and on budget. Exactly what they said they would do.
Verified TG Welding review
- Paperwork ready
- $2M general liability with a COI on request, plus a one-sheet contractor packet for vendor setup. Pay by ACH or check.
- Quotes you can bid
- Written quotes in days, so your steel number is real when the bid goes out.
- Shop and field
- One sub builds it and sets it. No hand-off between a fab shop and a separate erector.
006 Vendor setup
Set us up as a vendor in one sheet
The contractor packet has what your AP team needs. Questions go to accounting@tgweldingatx.com.
- Legal name
- TG Welding LLC
- Insurance
- $2M general liability
- Payment
- ACH or check
- Quotes
- In writing, in days
007 FAQ
Straight answers for general contractors
How fast can we get a steel number for a bid?
Send the drawings and scope and you'll have a written quote in days, not weeks or months. Email tim@tgweldingatx.com or call Tim at (512) 713-7179. If the drawings change, send the new revision and we'll update the quote so your bid matches the current set.
What do you need for vendor setup?
Our one-sheet contractor packet is ready for your office on this page. We carry $2M general liability and send a COI on request. Payment is by ACH or check, and AP questions go to accounting@tgweldingatx.com. Your office gets what it needs to set us up as a vendor without chasing us.
Do you install, or just fabricate?
Both. We fab the steel in our Liberty Hill bay and our crew sets it on your site. Our fully equipped mobile welding rig handles field welds and fit-up. That keeps one sub responsible for the steel from the shop to the finished install.
Do you work from our drawings?
Yes. We build to the drawings and specs you supply, including your engineer's drawings for structural work. We are fabricators, not engineers, so the design stays with your design team. If something on the drawings doesn't add up in the shop, we flag it before we cut.
Got a steel scope to quote?
Send the drawings to tim@tgweldingatx.com or call the shop at (512) 548-5401 for a written quote.