Supports, stands and skids, built in runs
TG Welding builds steel for mechanical, plumbing and industrial contractors in Central Texas. We fabricate pipe supports, equipment stands, racks, frames and skids in our Liberty Hill shop, with an overhead hoist and CNC plasma table. Our mobile rig handles field welds. Send drawings and quantities for a written quote in days, with the schedule confirmed in writing once you approve the quote.
001 The problem
Your trade needs steel, not a steel department
- 01
Supports hold up the install
The pipe and equipment are on site. The stands and supports are not, so your crew waits.
- 02
Field-built steel is slow
Cutting and welding frames on site ties up your best people. It is rarely as square as shop work.
- 03
Revs and repeat orders
Drawings change and the next job needs ten more. You need a shop that's careful with revs.
002 What we build
What we build for mechanical and industrial work
Shop-built steel that shows up square and ready to set.
- 01Pipe supportsSupports, hangers and pipe rails with lug plates, built to your drawings.→
- 02Equipment standsStands and frames sized to the equipment and the drawings you send.→
- 03Racks and skidsPipe racks, channel frames and skids built square in the shop.→
- 04Repeat runs welcomeFrames, lugs and supports in runs from one part to a thousand.→
- 05Access stairs and railSteel stairs and guardrail built from shop drawings.→
- 06Field weldingOur mobile rig comes to the site for tie-ins, mods and repairs.→
003 How it works
Drawings in. Steel out.
Four steps, all in writing, so your team always knows what is being built and when it lands.
- Send drawings and revsSend the current drawings, the rev and the quantity you need.
- Get a quoteWe send a written quote in days, not weeks or months.
- Approve the quoteYour schedule is confirmed in writing once you approve the quote.
- Built and deliveredWe build it in Liberty Hill and deliver it, or weld it in place on site.
004 From our jobs
Shot on our floor and our sites
Real TG Welding work. No stock photos.
Two welders fitting pipe frames on stands 
Welding pipe under the shop's overhead hoist 
Pipe and I-beam crossing, ready to set 
Pipe frames with lug plates lined up in the shop 
End view, pipe rails welded on a channel frame 
Stack of welded steel frames ready to finish 
Welding inside a large steel box frame in the shop 
CNC plasma table cutting plate parts
005 Why TG Welding
Why mechanical contractors use TG
They take on the tricky jobs other shops pass on and get them right.
Verified TG Welding review
- Real shop, real gear
- CNC plasma table, overhead hoist and racks for staging parts in our Liberty Hill bay.
- Production runs welcome
- We have shipped full pallets of lifting lugs and runs of pipe frames with lug plates.
- Shop and field
- Fab in the shop, plus a fully equipped mobile rig for field welds.
006 Vendor setup
Set us up as a vendor in one sheet
The contractor packet has what your AP team needs. Questions go to accounting@tgweldingatx.com.
- Legal name
- TG Welding LLC
- Insurance
- $2M general liability
- Payment
- ACH or check
- Quotes
- In writing, in days
007 FAQ
Straight answers for mechanical and industrial
Can you build pipe supports and stands to our drawings?
Yes. Send the drawings with the current rev and the quantity. We cut, fit and weld them in our Liberty Hill shop and quote the work in writing in days. We build to the engineered drawings you supply. We're not engineers, so the design stays with your team.
Do you handle repeat orders?
Yes. Production runs are welcome, from one part to a thousand. When the next job needs more of the same part, send the drawing rev. We stage parts on racks in the shop so counts and revs stay straight.
Can you weld on site in a running facility?
Our fully equipped mobile welding rig comes to the job site for tie-ins, mods and repairs. Tell us about the site, the access and any rules for work there. We will quote the field work in writing and confirm the schedule once you approve the quote.
What do you need to get us set up as a vendor?
Our one-sheet contractor packet is on this page. We carry $2M general liability and send a COI on request. We take payment by ACH or check. Send your vendor forms and any AP questions to accounting@tgweldingatx.com, and we'll get them back to you.
Need steel for the install?
Send drawings and quantities to sam@tgweldingatx.com or call the shop at (512) 548-5401 for a written quote.